Tweeter Pod – 2013-2022 Chevrolet Spark (EV)

3D printable tweeter pod for the 2013-2022 Chevrolet Spark (EV): download the STL file and print an affordable replacement for a discontinued or expensive original part.

About this part

Made a set of tweeter pods that fit 42mm JL tweeters and mount on the dash in my 2016 Chevy Spark EV. These should work in about any Spark.

The mounts angle the tweeters 45degrees to the middle and 15degrees up and are designed to aim the tweeter at the opposing headrest. The wires go through the hole in the middle and come out in between the tab. The tab is supposed to press into the slot between the dash and the A-pillar. I used a small piece of double-sided trim tape to hold the pod down to the dash and the tweeter into the pod.

The pods in the pic were printed in ABS and acetone vapor smoothed. Those in the pic are also earlier revisions with a smaller hole for the wires than the one in the file.

Designed in Inventor. The .ipt file is included if you want to change angles, hole sizes, etc. Only one file is included--just mirror it in your slicer for the other side.

Compatible vehicles

• 2013-2022 Chevrolet Spark (EV)

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Chevrolet parts

Browse all Chevrolet replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-4.0.