6.5" Door Speaker Spacers – 2001 Volkswagen Eurovan T4 (MV)

3D printable 6.5" door speaker spacers for the 2001 Volkswagen Eurovan T4 (MV): download the STL file and print an affordable replacement for a discontinued or expensive original part.

About this part

This is a wedge shaped spacer to accommodate aftermarket 6.5" speakers in the door of a VW T4 series Eurovan. Mine was installed on a 2001 North American Eurovan Weekender and the speaker used was a Harmony Audio HA65.

The OEM 6.5" speakers are very thin and many aftermarket speakers have large magnets that will not allow you to mount the speaker in the existing frame. These wedge shaped spacers will provide clearance in the rear of the enclosure for the magnet.

The OEM frame has a small protruding pin and a clip at the top and bottom of the frame that the spacer must navigate to sit flush onto the OEM frame. My the top clip on both my frames was broken so these spacers are not designed for that. The clip isn't required so you can break it off or modify the spacer. Wiggling the speaker and spacer into the frame is a bit "fiddly" but you can do it. See photos for what to expect.

Compatible vehicles

• 2001 Volkswagen Eurovan T4 (MV)

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Volkswagen parts

Browse all Volkswagen replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.