Abarth & Cup Holder Insert – 2007 Fiat 500 (Abarth)
Abarth & Cup Holder Insert – 2007 Fiat 500 (Abarth)
3D-printed abarth & cup holder insert for the 2007 Fiat 500 (Abarth), made to order as an affordable alternative to a discontinued or expensive original part.
About this part
The cup holders in the Fiat & Abarth 500 are, frankly, abysmal. They're very shallow, and wider than they need to be, so they don't actually hold on to anything. I was fed up with my 16oz Starbucks cup wobbling around when I drove around town (and even worse, when it was half full or less it would completely fall over) and decided to remedy the situation.
This insert fits snugly into the driver's side cup holder on the floor, and will accept a 16oz Starbucks cup with or without a cardboard collar. Your mileage may vary with other cups but I'm sure it'll work for many other drinks vessels.
The STL is oriented as intended to be installed - i.e. wider side up - and will probably print fine that way as there's no major overhangs. However for my print, I rotated it 180 around the X axis and printed it upside down.
There is still a little wobble because I didn't want to get the cup stuck, but it's the same as any other cup holder now. As the top of the holder comes up around half of the cup height, it ain't going anywhere.
If you press your cup in too hard and it DOES get stuck, a little force will remove the insert from the original holder.
Please note that this current version will block off the passenger side holder somewhat. But they have two free hands, right?
Demo of it working: https://www.youtube.com/watch?v=QBmaJMKgV8E
Example printed in Prusa Silver PLA
Compatible vehicles
- 2007 Fiat 500 (Abarth)
Always compare with your original part before ordering. Fitment can vary by trim level and production date.
Specifications
| Part | Abarth & Cup Holder Insert |
|---|---|
| Make | Fiat |
| Model | 500 |
| Year | 2007 |
| Production | 3D printed to order (FDM) |
| Design files | 1 (STL) |
| Part number | CAT-d1822340 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
How to order
This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.
More Fiat parts
Browse all Fiat replacement parts or search the full 3D-printed car parts catalogue.
Design credit: original design on Thingiverse, licensed CC BY-4.0.