Bonnet Prop Clip – 2000-2006 Vauxhall/opel Corsa C Corsa C
Bonnet Prop Clip – 2000-2006 Vauxhall/opel Corsa C Corsa C
3D printable replacement bonnet prop clip made for the 2000-2006 Vauxhall/opel Corsa C Corsa C: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.
About this part
This is to replace a broken/missing bonnet prop clip on a Vauxhall/Opel Corsa C. I believe the same clip is used on the Meriva and Tigra but have not been able to verify this personally.
There is one already on Thingiverse (https://www.thingiverse.com/thing:42481) but I could not get it to clip in properly and there is no provision for the bowden cable which should lie behind the clip adjacent to the metal.
I suggest printing in PETG (with 2 shells) so that the clip has some flexibility when fitting. ABS would probably be ok but PLA is likely to be too rigid and also possibly deform if it gets too hot under there!
Supports will be required for the clips to print successfully.
Compatible vehicles
- 2000-2006 Vauxhall/opel Corsa C Corsa C
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Bonnet Prop Clip |
|---|---|
| Make | Vauxhall |
| Model | Opel |
| Year | 2000 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 1 (STL) |
| Part number | CAT-b3298be9 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Vauxhall parts
Browse all Vauxhall replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-4.0.