Boot Lamp Holder – 2011 Volkswagen Up! AA

3D printable replacement boot lamp holder made for the 2011 Volkswagen Up! AA: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.

About this part

First gen. VW up! did not have the boot lamp even in the highest of trims. This is my remedy. It consists of a PIR LED lamp with batteries mounted on one of the hooks in the boot.

Glue the two parts together and mount the lamp with zip-ties. There are two holes in the front plate, those are for two M3 screws that will prevent the lamp to slide. I used "headless set screws", see image.

Just to be sure: you must print this in ABS, PETG or other high temperature plastic. PLA will not work and will melt in a vehicle. For ABS gluing I use nitro thinners to do that, altough acetone should work just as well.

Link to lamp: https://www.ebay.co.uk/itm/Kingavon-8-LED-Light-with-PIR-Sensor-Black-Garden-Garages/223068073254?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D225114%26meid%3D473b10bbe1b845529b5e03402743ca17%26pid%3D100227%26rk%3D4%26rkt%3D14%26sd%3D352309719033%26itm%3D223068073254%26pmt%3D1%26noa%3D0%26pg%3D2053904&_trksid=p2053904.c100227.m3827

Compatible vehicles

• 2011 Volkswagen Up! AA

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Volkswagen parts

Browse all Volkswagen replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-4.0.