Cargo Cover Tonneau Clip – 2018-2025 Mitsubishi Eclipse Cross

3D printable cargo cover tonneau clip for the 2018-2025 Mitsubishi Eclipse Cross: download the STL file and print an affordable replacement for a discontinued or expensive original part.

About this part

Mitsubishi Eclipse Cross (2018–2025) – Cargo Cover / Trunk Tonneau Clip (Replacement STL)

This is a replacement plastic clip/retainer for the cargo cover (trunk/luggage tonneau cover) on the Mitsubishi Eclipse Cross (2018–2025).
It’s designed to hold the edge of the cargo cover in place on the vehicle’s side/support point, helping eliminate looseness, rattles, and vibration—just like the original part shown in the photos.

✅ Vehicle fitment: Mitsubishi Eclipse Cross 2018–2025 (please compare with your OEM part before printing)
✅ Purpose: secure/anchor the cargo cover (tonneau) in the trunk area
✅ Use case: replaces a broken/cracked/missing OEM plastic clip

Installation

Remove the damaged/missing clip (if still present).

Place the printed part in the same position as the OEM clip.

Fasten it the same way as the original (screw/clip-in, depending on your cargo cover).

Test fit and adjust if needed (light sanding on contact surfaces usually solves tight fits).

Print recommendations

Material: PETG (recommended) or ABS/ASA (better for heat). PLA can work but may deform in hot cars.

Infill: 40–70% (higher if you want it extra rigid)

Perimeters/Walls: 4+

Layer height: 0.2 mm

Orientation: print so the “hook/clip” area has strong layer support (avoid orientations that make the clip rely on layer adhesion alone).

Post-processing: light sanding for a perfect fit.

Notes

Modeled from an original part and measurements from my vehicle. Small variations may exist between trims/years/production batches.

If it’s too tight: sand slightly. If it’s too loose: try XY compensation in your slicer or reprint with thicker walls.

Disclaimer

This is an unofficial 3D-printed replacement part and is not affiliated with Mitsubishi. Use at your own risk.

Compatible vehicles

• 2018-2025 Mitsubishi Eclipse Cross

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Mitsubishi parts

Browse all Mitsubishi replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.