Center Console Cup Holder Insert – 2007 Suzuki Jimny

Replace a broken or missing center console cup holder insert on your 2007 Suzuki Jimny with this 3D printable part from PartsRemade.

About this part

A PETG part for the central empty space between the chairs and under the handbrake. The part was first sized with laser cutting wood model, and then it was printed for use with a Prusa MK3 with very low infill. The place for the cup holders is designed to fit a further rubber piece made for Tesla center console.

The part is a bit taller to press fit in place, however, the extra 2-3 mm didn't do much and only caused a bit of deformation so, I would suggest scaling the whole thing down in the x-y direction.

The z-direction height of the central part is a bit shorter than normal to save materials but, the rubber part proved very efficient in compensating that difference.

The link for the rubber part, which proved very efficient
https://www.amazon.sa/-/en/Tersely-Console-Compatible-Storage-Accessories/dp/B0C3VM3HW3/ref=sr_1_8?crid=1A344FWALRYQF&keywords=tesla%2Bcup%2Bholder&qid=1696145617&sprefix=tesla%2Bcup%2Caps%2C189&sr=8-8&th=1

Compatible vehicles

• 2007 Suzuki Jimny

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Suzuki parts

Browse all Suzuki replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.