Cold Air Intake for Car – Porsche
Cold Air Intake for Car – Porsche
3D printable cold air intake for car for the Porsche: download the STL file and print an affordable replacement for a discontinued or expensive original part.
About this part
This is a cold air intake system for any car that has a wide but narrow (top to bottom) area to pull air into the engine compartment. This one is for a Porsche 928. These three parts are designed to print on a Prusa Mendel vs (hence the corners cut at a 45). You have to put each piece on the bed at a 45 degree angle (rotate 45 in the z-axis and then click 'center object' in Slic3r). I haven't printed the scoopfront6.stl so I'm not sure it will work OK (My mendel has interference issues at the top of the envelope on one side because it hits the frame). So that part is a work in progress, but the other two pieces came out good. Here's the way it's set up from back to front: Scoop3b.stl is the part inside the engine compartment, it connects to a 4"ID flex hose going back to the MAF.
Compatible vehicles
- Porsche
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Cold Air Intake for Car |
|---|---|
| Category | Mechanical/Functional |
| Make | Porsche |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 3 (STL) |
| Part number | CAT-P04696 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Porsche parts
Browse all Porsche replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY.