Console Tray – 2011-2013 Ford Edge

Need a replacement console tray for your 2011-2013 Ford Edge? This 3D model lets you print a replacement for a broken, worn or missing original piece.

About this part

My wife has been complaining about the original tray that fits in the console of her 2011 Ford Edge. It is difficult to insert and doesn't stay in place. Plus it is too small and doesn't do a good job of containing coins.

This console tray is offered as a replacement. I printed it on a MakerBot Replicator 2 - took about 8 hours to print. It was printed with supports, in order to ensure that the top rail prints properly.

The bottom corners tend to lift a bit, although that doesn't seem to effect the use or appearance. I could place shields around my printer to minimize this effect.

The tray should fit perfectly in a Ford Edge console. However, it will have a tendency to slide forward in the console. To prevent this, I placed some Velcro tape on the inside of the console, just in front of the tray. If you don't have Velcro tape available, almost any tape would work, although you might need several layers to obtain the desired thickness.

Compatible vehicles

• 2011-2013 Ford Edge

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Ford parts

Browse all Ford replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-4.0.