Control Panel for Tesla Model 3
Control Panel for Tesla Model 3
Need a replacement control panel for tesla model 3 for your Tesla Model 3? This 3D model lets you print a replacement for a broken, worn or missing original piece.
About this part
I designed this control panel for the forward center of a Tesla Model 3 to house switches for accessories, in my case emergency lighting for a roadside assistance vehicle. The panel has cutouts for 5 switches and 3 cigarette lighter plugs but can be customized to your needs. the first step is to remove the center console cover with the wireless charger, it is attached with clips. unscrew the 12 screws along both sides of the chrome trim piece and remove it. Pull off the passenger-side vertical carpet which is held with more clips. The hard plastic part of the side of the center console can be peeled away towards the front for access and does not need to be removed fully. You'll need to drill (2) 1-inch holes in the right side of your center console for the 2 connectors. I ran 12 AWG wire from the passenger-side kick panel, tapping into the thick red wire and bolting the negative to the frame. Inside the center console, I wired this to a 12v battery connector that I cut in half, mounting the female side in the center console, and wiring the male side to the panel. I used a 7-pin industrial connector, male end wired to the switches in the panel, female to the center console. You can buy larger connectors if you have more accessories. The 3-d printed spacer keeps the 7-pin connector from butting up against the inside of the passenger-side carpet. I ran the positives from the female end of the 7-pin connector the empty space inside the bottom back of the center console, where I can hook up the wires coming from any accessories. Amazon list for parts I used: https://www.amazon.com/hz/wishlist/ls/2SKP6CI21ZV7J?ref_=wl_share
Compatible vehicles
- Tesla Model 3
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Control Panel for Tesla Model 3 |
|---|---|
| Category | Center Console |
| Make | Tesla |
| Model | Model 3 |
| Format | Digital download – STL file for FDM 3D printing |
| Part number | CAT-P00645 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Tesla parts
Browse all Tesla replacement parts or search the full 3D printable car parts library.
Design credit: original design by Raphael Rosin on Thingiverse.