Cupholder And Center Console – 1994-2004 Chevrolet S10 2nd Generation
Cupholder And Center Console – 1994-2004 Chevrolet S10 2nd Generation
Replace a broken or missing cupholder and center console on your 1994-2004 Chevrolet S10 2nd Generation with this 3D-printed part, produced to order by PartsRemade.
About this part
This is a cupholder that will fit into the bench seat of a 1994-2004 Chevy S10/GMC Sonoma. It was designed to fit in the same mount as the removable factory cupholders. I made a design that would replace the cupholders, along with a variation that comes with a center console.
All of the parts are sliced into different pieces to be super glued together. I did this to reduce the amount of support material required, along with the ability to print these on smaller printers.
The only supports needed are for the base/bottom half. Also, the L shaped guides should be printed separately with a higher infill density for extra strength. With a lower infill, they could snap off (I learned this the hard way).
Notes:
- I do not recommend using hot glue instead of super glue because it could soften in hot summer conditions. You can see that my console lid is a bit warped due to the heat, but it still works fine. (I used PLA)
- You will not be able to fold the bench seat down with the center console there. This is why I made a cupholder only design so you would still have access to the middle seat and behind the bench.
- These cupholders are removable in case you want to swap it out for something else. It uses the same mounting design as the factory cupholders.
- The cupholder's diameter is 80mm.
Compatible vehicles
- 1994-2004 Chevrolet S10 2nd Generation
Always compare with your original part before ordering. Fitment can vary by trim level and production date.
Specifications
| Part | Cupholder And Center Console |
|---|---|
| Make | Chevrolet |
| Model | S10 |
| Year | 1994 |
| Production | 3D printed to order (FDM) |
| Design files | 10 (STL) |
| Part number | CAT-53394a19 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
How to order
This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.
More Chevrolet parts
Browse all Chevrolet replacement parts or search the full 3D-printed car parts catalogue.
Design credit: original design on Thingiverse, licensed CC BY-4.0.