Dash Phone Mount Extension – 2007-2018 Jeep Wrangler JK (JKU)
Dash Phone Mount Extension – 2007-2018 Jeep Wrangler JK (JKU)
3D printable replacement dash phone mount extension made for the 2007-2018 Jeep Wrangler JK (JKU): download the STL file and print a replacement for a cracked, lost or hard-to-find original part.
About this part
This is a ~180mm extension arm with a RAM style ball mount, designed to mount with the existing screw in the center dash storage tray. You will have to cut the ridge out of the center of the tray liner for the base to mount properly.
You will need:
(4) 6mm x 35mm carriage or hex head screws
(4) four 6mm wing nuts
I used a Steelie magnetic ball mount for the phone found here: https://www.amazon.com/Nite-Ize-Original-Steelie-Mount/dp/B00BAQKRHY/ref=sr_1_3?keywords=magnetic+ball+phone+mount+car&qid=1552431993&s=gateway&sr=8-3, but you can use pretty much any of this style magnetic phone mount.
** MAKE SURE YOU PRINT THIS WITH ABS or PETG!! PLA cannot withstand the temperatures that are likely to occur in the dash of a vehicle.
Compatible vehicles
- 2007-2018 Jeep Wrangler JK (JKU)
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Dash Phone Mount Extension |
|---|---|
| Make | Jeep |
| Model | Wrangler |
| Year | 2007 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 4 (STL) |
| Part number | CAT-349e6b60 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Jeep parts
Browse all Jeep replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-4.0.