Ford Ranger AC Control Mount
Ford Ranger AC Control Mount
3D printable ford ranger ac control mount for the Ford Ranger: download the STL file and print an affordable replacement for a discontinued or expensive original part.
About this part
In order to mount my CB radio, I had to relocate the AC control panel. I Moved the panel down below where there was a black plastic coin tray thing. After cutting some zip ties the wires and vacuum lines were long enough to reach to AC panel without modification. The bracket slips over a peg on the back of the AC control panel, then I used a 10x1-1/2 wood screw to thread through the existing hole in the panel and straight into the 3d printed part. You may be able to use a shorter screw but that's what I had laying around To install, I held the 3D printed part in place on the AC control panel and started the screw threading in, just before the screw pokes out into the slot cavity. repeat on the other side, then going up from the bottom you should be able to slide the 3D printed brackets onto the tabs sticking out of the dash on either side.
Compatible vehicles
- Ford Ranger
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Ford Ranger AC Control Mount |
|---|---|
| Category | Dashboard |
| Make | Ford |
| Model | Ranger |
| Format | Digital download – STL file for FDM 3D printing |
| Part number | CAT-P01281 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Ford parts
Browse all Ford replacement parts or search the full 3D printable car parts library.
Design credit: original design by Matthew McGoldrick on Thingiverse.