Front License Plate Bracket – 2022 Toyota Tundra
Front License Plate Bracket – 2022 Toyota Tundra
Replace a broken or missing front license plate bracket on your 2022 Toyota Tundra with this 3D printable part from PartsRemade.
About this part
I recently got a 2023 Toyota Tundra and discovered that the provided front license plate bracket needed to be screwed directly into the bumper. Just no. So, I designed this no-drill alternative which fits into the lower grille slit.
Print both parts, using high infill on the backer part, insert 10-24 nylon lock nuts into the premade sockets. They should press in fairly snugly but add a drop of glue to secure them. Before installing, run the screws in and out once to clean out any wayward glue. Slide the backer piece into a slit in the lower grille and work it around so that it faces forward. Use the wire bundles to help keep it from falling as you work it into position. Take two 10-24 x 2" screws and fasten the main bracket to the backer. Then take two 10-24 x 1 1/4" or 1 1/2" screws and fasten the plate (with or without a frame) to the main bracket. Print a couple of the washers if you want.
Before you start the installation, you can glue on a piece of foam, rubber, cloth or whatever to the back of the main mount where it will contact the bumper to protect it. My original bracket used a piece of thin foam packing material as in the photo. My final bracket used a piece of adhesive backed silicone rubber I got from Amazon: https://www.amazon.com/dp/B07GL9MHW7?psc=1&ref=ppx_yo2ov_dt_b_product_details
Best to use stainless steel hardware to keep the parts from rusting. M5 hardware might also fit but I didn't test it.
Compatible vehicles
- 2022 Toyota Tundra
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Front License Plate Bracket |
|---|---|
| Make | Toyota |
| Model | Tundra |
| Year | 2022 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 3 (STL) |
| Part number | CAT-debebb60 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Toyota parts
Browse all Toyota replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-4.0.