Head Unit Mounting Bracket – 2010-2015 Toyota Prius ZVW30

3D printable replacement head unit mounting bracket made for the 2010-2015 Toyota Prius ZVW30: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.

About this part

The standard KINGBEATS K2+ for the 2010 Toyota Prius ZVW30 is mounted onto the radio frame using an adapter frame. Both frames are equipped with clips. However, this standard adapter frame didn’t fit into the radio frame. I had to trim the adapter frame and its clips slightly. This resulted in the adapter frame falling through the radio frame. So, I decided to print the mounting based on the standard metal mounting that comes with the head unit.
My model is for the right-side mounting. The left-side mounting is symmetrical, so you would have to mirror my model. I printed my mounting using supports. The orientation of the mounting model is presented on the screen shots from Ultimaker Cura attached below.
I’m sharing this model with you, guys. Hope it’ll be of use.

Compatible vehicles

• 2010-2015 Toyota Prius ZVW30

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Toyota parts

Browse all Toyota replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-4.0.