Headlight Eyebrow – 1984-1989 Toyota Mr2 AW11
Headlight Eyebrow – 1984-1989 Toyota Mr2 AW11
3D printable replacement headlight eyebrow made for the 1984-1989 Toyota Mr2 AW11: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.
About this part
This is a scanned reproduction of one of the headlight eyebrows for the Toyota MR2 mk1.
The original piece that I copied is made of TPU and it didn't want to hold quite the right shape during scanning, so the curve of this reproduction isn't quite perfect. If you print this out of TPU again that shouldn't be an issue, but if you use a non-flexible filament you'll have to heat the finished piece and mold it to the mounting bracket.
I attached the metal strip from the original mounting hardware to the eyebrow and softened it with a heat gun to get it close enough, but you could also mount it directly to the car and then heat it. Be careful not to overheat your paint, and don't melt the edges of the eyebrow too much as they'll gladly curl up.
Compatible vehicles
- 1984-1989 Toyota Mr2 AW11
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Headlight Eyebrow |
|---|---|
| Make | Toyota |
| Model | MR2 |
| Year | 1984 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 1 (STL) |
| Part number | CAT-6265b9d5 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Toyota parts
Browse all Toyota replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-4.0.