Honda 40mm Brake Piston Dust Seal Fitting Tool
Honda 40mm Brake Piston Dust Seal Fitting Tool
Replace a broken or missing honda 40mm brake piston dust seal fitting tool on your Honda with this 3D printable part from PartsRemade.
About this part
I found a tip online about using a simple collar to help fitting the brake piston through the a rubber dust seal when rebuilding brake callipers, using rolled plastic sheet or stiff cardboard etc etc. Instead I made a 3D printed one with ABS filament as my first cardboard attempt failed to be strong enough. This size is to suit Honda S2000 13CLP15S calliper piston diameter (aprox 40.4mm). Even though it's a very very simple 'design' it saves a lot of frustration fitting the piston through the dust seal without damaging the new seal. So this allows you to fit the seal and check visually to see it's fully seated, then slide the piston through it, and remove the collar... Could be resized to suit any piston diameter I guess.
Compatible vehicles
- Honda
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Honda 40mm Brake Piston Dust Seal Fitting Tool |
|---|---|
| Category | Tools & Jigs |
| Make | Honda |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 1 (STL) |
| Part number | CAT-P06606 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Honda parts
Browse all Honda replacement parts or search the full 3D printable car parts library.
Design credit: original design by Martin Sneezy on Thingiverse, licensed CC BY.