Instrument Cluster Rings – 1997-2002 Mazda 626 GF

3D-printed replacement instrument cluster rings made for the 1997-2002 Mazda 626 GF: a simple way to replace a cracked, lost or hard-to-find original part.

About this part

Rings for instrument cluster/speedometer of late 90s/early 2000s Mazda models. Like v1, those are made specifically for 626 GF (facelift), but should also fit 323 BJ, Premacy CP and Demio DW.

v1 can be found here: https://www.thingiverse.com/thing:4865441

Benefits compared to v1:
- Not touching the glass (so no stains left)
- (Hopefully) no warping
- Not much post-processing, just print and place
- Much easier to get 2 colored rings (I used Glow in the dark PLA for the top part)

Cons compared to v1:
- Needs gluing to the instrument cluster.

I used mounting tape instead of a glue and for now it works very good. Mounting tape can be removed without any residue left. The whole mounting procedure can be watched here: https://www.youtube.com/watch?v=XJC4GCp8a3c

I printed the bottom part with 10% Lightning infill in Cura, while the top part is 100% infill. Both use PLA, but the top one is Glow in the dark PLA.

Compatible vehicles

• 1997-2002 Mazda 626 GF

Always compare with your original part before ordering. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

How to order

This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.

More Mazda parts

Browse all Mazda replacement parts or search the full 3D-printed car parts catalogue.

Design credit: original design on Thingiverse, licensed CC BY-4.0.