IPhone 11 Pro Max Holder/mount for Lexus IS 300 (XE30, 2013+) – Universal Fit
IPhone 11 Pro Max Holder/mount for Lexus IS 300 (XE30, 2013+) – Universal Fit
3D printable iphone 11 pro max holder/mount for lexus is 300 (xe30, 2013+) made for the car: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.
About this part
I don't like how chunky most phone holders are (due to wanting to fit any/all phones), or how they mount to your air vent or windscreen, 2 things I kinda need unobstructed. I wanted it out of the way, but still reachable, and figured the area at the front of the centre console would be perfect... so I designed this little holder specifically for my iPhone 11 Pro Max (in a simple case). Once the phone is in the holder, you barely even notice it and it looks like the phone is just "floating" there, perfectly within reach yet completely out of the way at the same time. Rotate the L bracket to sit upright and the phone holder to lay flat on its back, turn "Supports Everywhere" on, and print at 100% infill (not required, but I'd like it to last). Can use any colours you want to create the contrast for the logo, I just used black/silver to suit the interior of my car. With my Prusa on stock settings using the PrusaSlicer and the default 0.15mm profile, the fit ended up being absolutely perfect. I applied some CA glue and then used standard wood working clamps to press it tightly together until the glue dried, but I found it fit so snugly that the glue is actually optional. I swear I planned it that perfectly... I used some 3M adhesive tape to mount it to the car.
Compatible vehicles
- Universal fit – check the measurements against your vehicle
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | IPhone 11 Pro Max Holder/mount for Lexus IS 300 (XE30, 2013+) |
|---|---|
| Category | Phone Mounts |
| Make | Universal |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 2 (STL) |
| Part number | CAT-P05755 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
Design credit: original design by Obsolete Nerd on Thingiverse, licensed CC BY.