Jeep Wrangler YJ – Fender Flare Nut Spanner + 13mm Hex Adapter
Jeep Wrangler YJ – Fender Flare Nut Spanner + 13mm Hex Adapter
Replace a broken or missing jeep wrangler yj - fender flare nut spanner + 13mm hex adapter on your 1994 Jeep Wrangler with this 3D printable part from PartsRemade.
About this part
Just a spanner I whipped up to aid in the removal of fender flare nuts on my 1994 Jeep Wrangler YJ. Has a hole down the middle for the tip of self tapping screws to poke through. Small fillets down side to aid in comfort if holding. I have also created a little hex head adapter for either a 13mm socket or spanner. Part group: EYJ-205 Part number: J400 4868 Onshape Link Here For both I'd recommend printing them at an angle (so the layer lines are not parallel to the direction torque is being applied). Though given that these shouldn't be heavily torqued it's more a safety net for corroded fasteners. Infill should be fairly high as well for the same reason. Supports are naturally required if you're printing at an angle - mandatory for the hex adapter but if printing the spanner flat then it'll be fine without supports.
Compatible vehicles
- 1994 Jeep Wrangler
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Jeep Wrangler YJ - Fender Flare Nut Spanner + 13mm Hex Adapter |
|---|---|
| Category | Tools & Jigs |
| Make | Jeep |
| Model | Wrangler |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 1 (STL) |
| Part number | CAT-P06614 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Jeep parts
Browse all Jeep replacement parts or search the full 3D printable car parts library.
Design credit: original design by nilchaos on Printables, licensed CC BY.