Key Fob End Cap / Key Ring Clip – 2005-2008 Toyota Prius

3D printable replacement key fob end cap / key ring clip made for the 2005-2008 Toyota Prius: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.

About this part

The plastic clip surrounding the metal key used to open the door (And attach the key to a key ring) was broken completely. It took about 17 attempts before I came up with a usable result. This so far lasted over a year in my pocket before I traded my car in. The keys were identical between my 2005 and 2008 models, so it should fit anything between those two years, possibly more. Don't need to glue the halves together, but do so if you need.. The two halves slide together and the key ring holds it together. Print with the openings up as showin in the above photos and you won't need any supports. I use blue painter's tape on an unheated bed with PLA plastic. Let the parts fully cool before removing from the bed, so that they don't warp any. .1mm will make it so smooth you won't notice ridges. Zero post-printing process needed

Compatible vehicles

• 2005-2008 Toyota Prius

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Toyota parts

Browse all Toyota replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-4.0.