Maxxair 6-button Switch Mount – 1965-2026 Ford Transit

3D-printed replacement maxxair 6-button switch mount made for the 1965-2026 Ford Transit: a simple way to replace a cracked, lost or hard-to-find original part.

About this part

This mount is designed to attach the Maxxair 6-button switch to a 7500K Maxxair fan in a 2019 Ford Transit passenger van. The remote that comes with the unit is unreliable, and the batteries often die, so I added a control switch as the solution.

You need to use the dedicated (MA69FR) Ethernet cable made for the fan. A regular Cat6 cable end won't fit in the Maxxair fan control box it too big. Run the cable above the headliners. The most challenging part was routing the cable around the curved cabin headliner without removing the entire thing. I only had to remove a few screws on the passenger step-in handle and sun visor to reach my arm down in the front to fish it through the hole you drilled into the cubby compartment.

Where to order the parts.
https://www.etrailer.com/Accessories-and-Parts/MAXXAIR/MA59FR.html
https://www.etrailer.com/p-MA69FR.html

Print the switch mount in PLA or PLA+ with a 10% infill standing up with no supports. The Cubby fill pad was made with TPU.

Compatible vehicles

• 1965-2026 Ford Transit

Always compare with your original part before ordering. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

How to order

This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.

More Ford parts

Browse all Ford replacement parts or search the full 3D-printed car parts catalogue.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.