Mini Atx Fuse Adapter – 1969 Ford Mustang

3D-printed replacement mini atx fuse adapter made for the 1969 Ford Mustang: a simple way to replace a cracked, lost or hard-to-find original part.

About this part

Designed for my 69 Mustang but i have found this will fit multiple models such as a 69 Cougar or 71 Torino

Fuse holder/adapter based off https://www.thingiverse.com/thing:1893269


<B>Mini ATX Adapter for our 69 Mustang buss fuse panels.</B>

<font color="red"><I>This requires cutting the brass bar into sections, beveling out the edge, and soldering connectors to it</I></font>

1) - ACC Type - For adding the Accessory wire where a fuse isn't present

2) - FULL - Where the fuse is present and has the screw connector

3) - ACC-Bolt - Allows you to add a small bolt to connect to the ACC Accessory instead of using a wire lead

<B>Configuration Types: </B>

1) - Bolt-On Requires removal of the unit and to put the bolt through. Does eliminate the ability to use the push on washer that holds it to the Wiring harness. Only matters for removal really

2) - Push-ON....The center hole will push around the bolt and is held in by the bus fuse holders.



Contacts:
http://www.digikey.com/product-detail/en/keystone-electronics/3557/36-3557-ND/2092485

Brass Bar:
https://www.amazon.com/gp/product/B0748DQ1MP

Compatible vehicles

• 1969 Ford Mustang

Always compare with your original part before ordering. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

How to order

This part is in our catalogue and is printed on request. Send us a request with your vehicle details and we will reply with a price and delivery time.

More Ford parts

Browse all Ford replacement parts or search the full 3D-printed car parts catalogue.

Design credit: original design on Thingiverse, licensed CC BY-4.0.