NA Mazda Miata Intake Split Mold – Mazda MX-5
NA Mazda Miata Intake Split Mold – Mazda MX-5
Need a replacement na mazda miata intake split mold for your Mazda MX-5? This 3D model lets you print a replacement for a broken, worn or missing original piece.
About this part
Split mold to make this thing out of fiberglass or carbon fiber. Each side is printed in two pieces that are then glued together, enabling this to be made on an ender 3. After each half has been cured and rough trimmed with an oscillating multitool remove from mold, sand, align and glue the two halves together with thickened epoxy putty (Or whatever you think would work). On mine I then taped the glue seam with carbon and wrapped the entire thing after that. I had to sand down the ends so the silicon tubing and filter would fit, I accidentally put too much carbon on. This would also work better if the filter end was a little longer, it's difficult to attach the filter with the small amount of wiggle room. I used west systems epoxy with fast hardener. I used .2 layers and 4 shells. Remember to use mold release/wax!
Compatible vehicles
- Mazda MX-5
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | NA Mazda Miata Intake Split Mold |
|---|---|
| Category | Accessories |
| Make | Mazda |
| Model | MX-5 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 4 (STL) |
| Part number | CAT-P00259 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Mazda parts
Browse all Mazda replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY.