Rear Dashcam Mount – 2010-2024 Toyota 4runner N280

3D printable replacement rear dashcam mount made for the 2010-2024 Toyota 4runner N280: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.

About this part

Update: 12/20/2023
The V3 I uploaded a while ago should have enough space to mount the backup camera. I've tested it and used it myself. Please leave feedback if it works or doesn't for you. Thank you!

Update: 1/10/2023
I intend to make just one or two changes to this to make it a little easier to route the cable and possibly more surface area for the camera. Will also add the fastener part number incase you want to buy a few from Toyota (or from ebay, it's really inexpensive) to replace what you're using now. Stay tuned!

---- snip snip

After seeing a few on the www.toyota-4runner.org, and unable to reach those who made them, I decided to make my own.

This doesn't require any special riveting, bolts, or screws; it reuses the original fastener that you pull out with a pair of pliers.

This is for a Viofo rear dash cam, but you can use any CAD app and enlarge (or shrink) the pad area.


I suggest PETG if we're talking Arizona or extremely warm climates. Otherwise PLA or PLA+ will do.

Steps:

1. Print this mount
2. take your Viofo / dashcam (or what have you) and hold it down onto the mount for a minute or two. Let it sit over night.
3. Take a pair of pliers and rip out the fastener (save it. If you goofed it up and tore it up, you can easily find an inexpensive replacement bunch on ebay called "toyota headliner retainers")
4. pull power cord through hole and through the guide on the mount
5. place mount w/cam in place and push the fastener through
6. Make sure it's good and steady, and then plug in the power.

Compatible vehicles

• 2010-2024 Toyota 4runner N280

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Toyota parts

Browse all Toyota replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-4.0.