Rear View Mirror Adapter – 2000-2009 Honda S2000 AP1/AP2

Need a replacement rear view mirror adapter for your 2000-2009 Honda S2000 AP1/AP2? This 3D model lets you print a replacement for a broken, worn or missing original piece.

About this part

NOTE: This STL file for this part was updated (03-20-2022) to reflect some minor improvements to the overall design.

This is an adapter that allows the factory S2000 rear view mirror mount to work with an optional full display dimming rear view mirror from '20-'22 ZL1 LT4 Camaro. This mirror installation is intended to assist with parking and does not provide a good angle (camera is mounted too low) for full time use while driving.

Some modifications to the mirror itself are required for this mount to work. Modifications include trimming/grinding,drilling surrounding plastic and rerouting wires. The upper edge of the rear cover sits slights proud of the surrounding area, but will still remain securely attached.

The two mirror views shows the view with the digital tilt set to the highest and lowest settings.

Compatible vehicles

• 2000-2009 Honda S2000 AP1/AP2

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Honda parts

Browse all Honda replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-4.0.