Smartphone Holder – 1999 Toyota Yaris

Need a replacement smartphone holder for your 1999 Toyota Yaris? This 3D model lets you print a replacement for a broken, worn or missing original piece.

About this part

Smartphone holder for the Toyota Yaris III
The tray must be pulled out with a little force. It is only clicked into place.

1. Place the template in the compartment and drill a hole ( hole can be plugged again when no longer needed).
2. Screw the magnetic smartphone holder (available from Amazon, for example; type see picture) into place using a long bit and the cover.
3. We recommend attaching foam tape as shown to prevent the insert from rattling, as there is still a little space between the part and the compartment.
4. Insert the holder into the compartment and tighten it from behind with a screw.
5. Click the compartment back into place... Done :)

It is advisable to embed the metal plate for the magnet a little further down, as this will provide more space for the ventilation grille!

The holder can of course also be modified for other purposes ;)

I printed it with PETG, PLA maybe not stable enough...

Compatible vehicles

• 1999 Toyota Yaris

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Toyota parts

Browse all Toyota replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.