Speaker Adapter Plate – 1992 Volkswagen Passat (GL)
Speaker Adapter Plate – 1992 Volkswagen Passat (GL)
Need a replacement speaker adapter plate for your 1992 Volkswagen Passat (GL)? This 3D model lets you print a replacement for a broken, worn or missing original piece.
About this part
The 32 year old speakers on my car had all worn out long ago, but I couldn't find any cheap 3.5" drivers. This plate allows you to install common 3" speakers (I used the Facmogu 3 inch 4 ohm drivers) in place of the original ones, a quick and simple alternative to replacing the entire sound system.
There are two adapters: one for the boxes in the doors, and another for the speakers in the dash.
Boxes: Installation is relatively straightforward. Disassemble the boxes, then cut the wires to the old speaker and knock it out with a hammer. Mount new speaker to plate to box. Solder wires to the new speaker, reassemble and you're good to go.
Dash: This is a bit more annoying. You'll have to gut the original speakers and keep the plastic ring that makes up the basket. Glue the print in somehow (I used superglue), then screw the speakers into the bracket. I cut off the old connector and attached terminals to the wires, then connected those to the speakers. Once that's in, the replacements should just click in place of the old ones.
Rear: You don't need any adapters for these. Regular 4x6 drivers should fit in just fine.
Installed on a 1992 Volkswagen Passat GL wagon. Note: the print in the photos had the holes spaced incorrectly. This has been fixed.
Compatible vehicles
- 1992 Volkswagen Passat (GL)
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Speaker Adapter Plate |
|---|---|
| Make | Volkswagen |
| Model | Passat |
| Year | 1992 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 2 (STL) |
| Part number | CAT-32916d37 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Volkswagen parts
Browse all Volkswagen replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.