Speaker Ring – 2003 Volvo S60
Speaker Ring – 2003 Volvo S60
3D printable speaker ring for the 2003 Volvo S60: download the STL file and print an affordable replacement for a discontinued or expensive original part.
About this part
I wanted to replace the speakers in my Volvo S60 2003, only to find that the stock speakers are larger than my JBL GX502 ones I used in my old car. Volvo doesn't really make it easy on anyone to replace the speakers. Was searching for a ring that would allow me to fit 5.25" (130mm) speakers in the 6.5" (165mm) hole. Unfortunately no real luck, so I had to create my own version, which is also my very first project in Fusion 360. Not bad after all. The holes that align with the volvo bracket are 2mm, but I would recommend to drill them to 3mm, as 2mm screws are not too common. Also because this is just a thin ring that doesn't really take drilling that well, use bolts and nuts instead to secure ring to bracket. The speakers holes itself are 4mm, and if you don't overdo it, it will secure just fine with only screws.
Compatible vehicles
- 2003 Volvo S60
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Speaker Ring |
|---|---|
| Make | Volvo |
| Model | S60 |
| Year | 2003 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 1 (STL) |
| Part number | CAT-a5aa282d |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Volvo parts
Browse all Volvo replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-4.0.