Subwoofer Mount – 2004-2006 Chevrolet Avalanche

3D printable subwoofer mount for the 2004-2006 Chevrolet Avalanche: download the STL file and print an affordable replacement for a discontinued or expensive original part.

About this part

This is likely going to be an incredibly niche thing, but since I designed it I'm posting it.

I replaced the center console in my 2004 Chevrolet Avalanche with a jump seat, but this meant that I had to put the stock subwoofer in a different location. I designed this mount that connects to the rear air redirect box since I no longer had rear seating air anyways. It's a very awkward fit to get the OEM screws into the subwoofer mount and onto the airbox but once you do get them in it mounts pretty sturdy. You'll need to keep the front cover that comes on the subwoofer inside the center console, and you'll also need some nuts and bolts to attach the mount to the subwoofer itself. Hole placement is a little off unfortunately, so you may have to do a little bit of drilling.

Recommend printing in ABS since it gets hot inside the truck in the summer. Print is also very awkward so I recommend a brim and supports.

Compatible vehicles

• 2004-2006 Chevrolet Avalanche

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Chevrolet parts

Browse all Chevrolet replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.