Tailgate Trekking Pole Holder – 2016-2023 Toyota Tacoma 3rd Gen
Tailgate Trekking Pole Holder – 2016-2023 Toyota Tacoma 3rd Gen
3D printable tailgate trekking pole holder for the 2016-2023 Toyota Tacoma 3rd Gen: download the STL file and print an affordable replacement for a discontinued or expensive original part.
About this part
These holders attach using the existing trim screws in the tailgate of a 3rd gen Tacoma. The base fits flush when tightened, and the screw head is recessed. I built them for trekking poles with a diameter of 18 mm. There are two versions of clamps, allowing for different gaps between the poles, 12 and 17 mm. The clamp part slides tightly into the base, but is not so tight that it can't be removed when not in use.
40% or more infill is recommended for stiffness. PETG is a better than PLA in this case, it is less brittle and stronger.
The larger hole in the base faces down on the print bed, support is needed beneath that hole. The angled end should print ok without support.
Compatible vehicles
- 2016-2023 Toyota Tacoma 3rd Gen
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Tailgate Trekking Pole Holder |
|---|---|
| Make | Toyota |
| Model | Tacoma |
| Year | 2016 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 3 (STL) |
| Part number | CAT-3715d57d |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Toyota parts
Browse all Toyota replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-4.0.