Tailgate Trim Clip – 1996-2000 Volvo V70 P80

3D printable tailgate trim clip for the 1996-2000 Volvo V70 P80: download the STL file and print an affordable replacement for a discontinued or expensive original part.

About this part

I got tired of replacing tailgate clips on my V70, so I made the decision to have 4 visible screws but no more rattling trim !

It requires cutting the face of the original mounting point (pic 2) and drilling 4 holes into the top of the trim (pic 3). If I remember correctly the center of the hole should be 12mm from the edge, but I'd recommend measuring yourself before drilling anything.

I eyeballed and market the center of the original mounting holes before removing them, the clip does have a bit of side to side wiggle room to allow so it doesnt need crazy precision.

This was done on a V70, might be different on an 850.

The screw hole was made for M4 coarse thread screws (the kind you find all over those cars).

Printed in PETG, on its side (pic4) so that the layers are perpendicular to the flexing point.
As of posting (03/2023) they have only been installed for a few days, I cant vouch for durability yet.

Compatible vehicles

• 1996-2000 Volvo V70 P80

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Volvo parts

Browse all Volvo replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-4.0.