Tesla Model 3 Uniden Radar Remote Console + USB + 12v
Tesla Model 3 Uniden Radar Remote Console + USB + 12v
Need a replacement tesla model 3 uniden radar remote console + usb + 12v for your Tesla Model 3? This 3D model lets you print a replacement for a broken, worn or missing original piece.
About this part
This is a panel to house a remote for a Uniden R3 radar detector designed to fit is console of a Tesla Model 3. There are also provisions for a 12v cigarette lighter adapter + 2 USB power adapters plus a spot for an on/off switch so that power can be turned off discreetly for the radar unit. One of the USB power ports faces inside for the purpose of powering a wireless phone charging pad and freeing up the stock USB ports for dashcam USB key and music USB key. The panel should be flocked with material to give it a nice finish and the flocking is considered into the dimensions to ensure fit. The spot for the Uniden remote is quite tight and may need some minor filing as the remote is designed to be pressure fit. To secure the back panel I actually drilled a couple holes and used zip ties - as this is in the back, it can not be seen. There are also 2 brackets to hold the panel in place. You may or may not need them as the panel will fit tight with pressure. If you decide to use the brackets, they can be zip tied in place by drilling holes or using strong double-sided tape. Tip. Solder and heat shrink all wiring. Make sure you don't have excess length wiring to ensure everything fits. There's not a lot of room to cram it all in. Most of the parts were purchased on Amazon.
Compatible vehicles
- Tesla Model 3
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Tesla Model 3 Uniden Radar Remote Console + Usb + 12v |
|---|---|
| Category | Center Console |
| Make | Tesla |
| Model | Model 3 |
| Format | Digital download – STL file for FDM 3D printing |
| Part number | CAT-P00668 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Tesla parts
Browse all Tesla replacement parts or search the full 3D printable car parts library.
Design credit: original design by Min Cooper on Thingiverse.