Toyota Tacoma 1G Transmission Breather Vent Relocation
Toyota Tacoma 1G Transmission Breather Vent Relocation
3D printable toyota tacoma 1g transmission breather vent relocation made for the Toyota Tacoma: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.
About this part
This is an adapter to relocate the transmission breather vent on a manual transmission 1gen (ie. first generation) Toyota Tacoma. The purpose of relocating the vent is to prevent water ingress into the transmission. It definitely works on a 2001 SR5 MT, other years might have subtle variations so YMMV. Note that you need two such adapters as there are two vents on the transmission. The transfer case and the front diff are raised from the factory. The rear diff needs a different nipple adapter and a hose. Snaps unto the nipple and has room for a small clamp to tighten. The barbed end fits a 3/8" hose.
Compatible vehicles
- Toyota Tacoma
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Toyota Tacoma 1G Transmission Breather Vent Relocation |
|---|---|
| Category | Mechanical/Functional |
| Make | Toyota |
| Model | Tacoma |
| Format | Digital download – STL file for FDM 3D printing |
| Part number | CAT-P04888 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Toyota parts
Browse all Toyota replacement parts or search the full 3D printable car parts library.
Design credit: original design by K Owen on Thingiverse.