Toyota Tacoma 1st gen (1995-2004) Pack – 44 STL Files
Toyota Tacoma 1st gen (1995-2004) Pack – 44 STL Files
Here you get Toyota Tacoma 1st gen (1995-2004) 3D printed parts as digital files: 44 STL models in one pack for €49.99. The single files add up to €362.56, so the pack saves you 86%. Download the ZIP straight after payment, then print at home or hand the files to a local print shop.
Why a pack? Small plastic parts on a Toyota Tacoma 1st gen wear out one after another, and buying them one at a time adds up. With the whole set on your computer you can print the next one the day it breaks. Inside you will find things like front camera bracket, brake pressure bleed adapter, headlight access panel clip and center cup holder divider.
How it works
- Buy the pack. One payment of €49.99 for all 44 files.
- Download the STL files. The ZIP is ready right after checkout and stays in your account.
- Print. Use your own 3D printer or send the file to a print shop. We recommend PETG for most parts and ASA for anything that sees sun or engine heat.
Part types in the Toyota Tacoma 1st gen pack
| Part type | Files |
|---|---|
| Knobs, handles and switches | 7 |
| Clips, fasteners and bushings | 7 |
| Covers, caps, panels and trim | 7 |
| Audio, gauges and electronics | 5 |
| Brackets, mounts and adapters | 4 |
| Cup, phone and device holders | 4 |
| Lights and lamp parts | 4 |
| Storage, organizers and hooks | 4 |
| Vents, ducts and intake | 1 |
| Other parts | 1 |
| Total | 44 |
Toyota Tacoma 1st gen pack: common questions
Will these files fit my Toyota Tacoma 1st gen?
Each file was designed by an independent designer for this model, and the product page of each part shows its details and designer. Trim levels and years can differ, so compare the model with your original part before you print.
Who made the designs?
Independent designers. Each one is credited on the product page of the part they designed.
Do you ship a physical part?
No. You buy digital files only. After checkout you download one ZIP with all 44 STL files.
I don't own a 3D printer. Can I still use the files?
Yes. Any local print shop or online print service can print an STL file. Send them the file for the part you need and ask for PETG or ASA.
More for your car
Browse all Toyota parts or compare with our other packs. Missing a part? Contact us with a photo.
What's inside
- Window Latch for 1998 Toyota Tacoma Back Window
- 2000 Tacoma Hood Support Rod Holder – 2020 Toyota Tacoma, 2017 Toyota Tacoma, 2001 Toyota Tacoma
- Hvac Knob – 2004 Toyota Tacoma
- Passenger Side Interior Door Handle Latch Cable Clip – 2003 Toyota Tacoma (Passenger Side)
- Cup Holder Spacer – 2003 Toyota Tacoma 1st Gen
- Door Handle Button Cover – 2002 Toyota Tacoma
- Side Marker Light Clips – 2001-2004 Toyota Tacoma
- Ignition Key Bezel – 2001-2004 Toyota Tacoma
- Lower Headlight Trim Clip – 2000 Toyota Tacoma
- Lower Exterior Window Door Trim Clip – 2000 Toyota Tacoma (Prerunner)
- Heater Knob – 2000-2004 Toyota Tacoma
- Shift Cable Bushing – 1998-2004 Toyota Tacoma
- Headlight Access Panel Clip – 1996-2000 Toyota Tacoma
- Windshield Washer Fluid Reservoir Cap – 1995-2004 Toyota Tacoma
- Window Bracket – 1995-2004 Toyota Tacoma 1st Generation (Extended Cab)
- Usb Dash Plug – 1995-2004 Toyota Tacoma 1st Gen
- Trim Ring For Pioneer Nex In Scosche Kit – 1995 Toyota Tacoma
- Thermostat Knobs – 1995 Toyota Tacoma
- Switch Blank Bic Lighter Holder – 1995-2004 Toyota Tacoma 1st Gen
- Spare Tire Crank Lock Guide – 1995 Toyota Tacoma
…and 24 more files.
Always compare with your original part before printing. Models for safety-critical parts are not included.