Trunk Cargo O Ring Anchors – 2010-2018 Volvo S60 P3
Trunk Cargo O Ring Anchors – 2010-2018 Volvo S60 P3
3D printable trunk cargo o ring anchors for the 2010-2018 Volvo S60 P3: download the STL file and print an affordable replacement for a discontinued or expensive original part.
About this part
These help reduce excessive movement of cargo in your trunk. The anchor mounts are designed for 3mm screws but I suggest testing first in a vice, etc. You may want to pre-drill a bit. I picked up a set of 1" steel rings at my local Lowes for less than $1 ea. I would not put a very heavy load on these. Use your own judgement. I printed mine out of PETG. ABS would also work. I would advise against printing these out of PLA.
Compatible vehicles
- 2010-2018 Volvo S60 P3
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Trunk Cargo O Ring Anchors |
|---|---|
| Make | Volvo |
| Model | S60 |
| Year | 2010 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 2 (STL) |
| Part number | CAT-caa22c7a |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Volvo parts
Browse all Volvo replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-4.0.