UV-5R and Mic Stand for Ram 1500 (4th Gen)
UV-5R and Mic Stand for Ram 1500 (4th Gen)
3D printable uv-5r and mic stand for ram 1500 (4th gen) for the RAM 1500: download the STL file and print an affordable replacement for a discontinued or expensive original part.
About this part
I made this to take up an otherwise useless space in my truck, since I didn't have room anywhere else. This is a very niche solution for a very niche problem,so It is made to slot right into the small side pocket of the center console. You could use double-sided tape to keep it down, but you shouldn't need to. The radio and microphone stay locked in place using the grooved on the back side of the model, preventing them from moving around when you pick up the mic. I made this with the stock UV-5R and the Baofeng UV-5R mic, so it has not been tested with any other setup. It should work with most radios, as long as the back clip is long enough.
Compatible vehicles
- RAM 1500
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | UV-5R and Mic Stand for Ram 1500 (4th Gen) |
|---|---|
| Category | Center Console |
| Make | Ram |
| Model | 1500 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 1 (STL) |
| Part number | CAT-P00606 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Ram parts
Browse all Ram replacement parts or search the full 3D printable car parts library.
Design credit: original design by Bill Hering on Thingiverse, licensed CC BY.