Vent Slot Mount Adapter – 1997 Volkswagen Polo 6N1

3D printable vent slot mount adapter for the 1997 Volkswagen Polo 6N1: download the STL file and print an affordable replacement for a discontinued or expensive original part.

About this part

I wanted a vent mount for my Phone holder that doesn't wiggle around so much. So I designed one that perfectly fits the vent slots in my car.
I have a '97 Volkswagen Polo 6N1.

The mount has a hole in the centre for a screw. In that way you can connect anything to the mount you want. I used a combination of two Car Phone Holders.

-> This is the main phone holder (https://www.amazon.de/UGREEN-Autohalterung-Handyhalterung-L%C3%BCftungsschlitz-kompatibel/dp/B07F3X8PXZ?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=ugreen+handyhalterung+auto&qid=1622820709&sr=8-4&linkCode=sl1&tag=meinerasenkante-21&linkId=ee788a41ca7b2800dd4406a612375bce&language=de_DE&ref_=as_li_ss_tl), since it had no ball joint, I combined it with an older mount which had a ball joint on it. I would recommend you try out these ball joints created by DieZopfe (https://www.thingiverse.com/thing:4739696).

After printing you can just clip it between the vent slots.

Compatible vehicles

• 1997 Volkswagen Polo 6N1

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Volkswagen parts

Browse all Volkswagen replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-4.0.