Voltmeter Bracket – 1990 Toyota Pickup

Need a replacement voltmeter bracket for your 1990 Toyota Pickup? This 3D model lets you print a replacement for a broken, worn or missing original piece.

About this part

This mount is designed to hold a "Drok 0.56 Inch DC Voltage Meter" on the lower left of a 1990 Toyota Pickup dashboard (see photos). The inexpensive Drok meter is easily available on Amazon or elsewhere, and this part provides a secure, clean way to display the meter so that's it's visible but out-of-the-way and not too obtrusive. (I wanted a way to monitor the actual voltage level of the system, in order to keep an eye of the truck's alternator performance, especially with various accessories in use.)

Note: the larger hole on the top of the bracket allows you to route the meter wires through, and through the dash plastic, to connect with a good power and ground under the dash. There are also two smaller screw holes to fasten the mount to the dash.

The mount can be printed in any rigid filament and shouldn't require any support, if it's oriented correctly on the print bed. Infill of 35% is recommended, although some experimentation might be necessary. Sanding, priming, and painting the printed model will give a finished and professional appearance to the vehicle.

Compatible vehicles

• 1990 Toyota Pickup

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Toyota parts

Browse all Toyota replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.