Volvo Glove Box Shock Ball Joint
Volvo Glove Box Shock Ball Joint
3D printable volvo glove box shock ball joint for the Volvo: download the STL file and print an affordable replacement for a discontinued or expensive original part.
About this part
This is a fix for Volvo Part Number 9491713 . The small plastic parts connecting this spring to the ball it hangs from broke off due to old age and I wanted to replace it. The part is pretty cheap, but it's a pain to install due to difficult to reach screws. Instead, I designed this part that can be glued onto the existing part without removing from the car. This was an easy, effective, and nearly free fix for this problem. All you have to do is clip off right below the existing ball socket and then slide this part over with some epoxy. There are a couple of holes that could be used for screws if you don't want to epoxy it.
Compatible vehicles
- Volvo
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Volvo Glove Box Shock Ball Joint |
|---|---|
| Category | Interior |
| Make | Volvo |
| Format | Digital download – STL file for FDM 3D printing |
| Part number | CAT-P03378 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Volvo parts
Browse all Volvo replacement parts or search the full 3D printable car parts library.
Design credit: original design by Calvin McLean on Thingiverse.