XRAD'S Land Rover Discovery 2 License Plate Light Surround
XRAD'S Land Rover Discovery 2 License Plate Light Surround
3D printable xrad's land rover discovery 2 license plate light surround made for the Land Rover Discovery: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.
About this part
Tired of those dim license plate lights? Get some 3w led lights off ebay Eagle eye LEDs 3w: https://www.ebay.com/itm/20X-3W-LED-DRL-Eagle-Eye-Car-Fog-Daytime-Reverse-Backup-Parking-Signal-Light-12V-/222328451370 and print this housing. Uses a 500ohm (or close) resistor on the positive lead as lights are a bit too bright for license plate needs. Don't worry, if you hook up reverse polarity, led does not fry. Re-use the OEM rubber surround and the spade connectors. Use some new #6 speed nuts(timmerman nuts) and #6 stainless screws to hold in place. #8 might work too but you have to make some room for the nut. A dab of 2-part devcon plastic welder to hold the nut and seal the LED housing to the surround, and a bit of heat shrink and good to go. I provided a 3D print with round PADS as well as the base model. Padded one prints for me better than brim or rim.
Compatible vehicles
- Land Rover Discovery
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | XRAD'S Land Rover Discovery 2 License Plate Light Surround |
|---|---|
| Category | Light Covers |
| Make | Land Rover |
| Model | Discovery |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 2 (STL) |
| Part number | CAT-P04068 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Land Rover parts
Browse all Land Rover replacement parts or search the full 3D printable car parts library.
Design credit: original design by Pickle Rick on Thingiverse, licensed CC BY.