Automatic Gear Release Knob – 2010-2016 Renault Megane (GT)
Automatic Gear Release Knob – 2010-2016 Renault Megane (GT)
3D printable replacement automatic gear release knob made for the 2010-2016 Renault Megane (GT): download the STL file and print a replacement for a cracked, lost or hard-to-find original part.
About this part
This is a selfmade model of the release-knob of the Automatic-Gear-Stick fitting for the Renault Megane 4.
The shaft-hole-ribs are thicker than in the original part, so they should work longer than the original ones.
I printed it in PLA, ABS and PETG, just as a test, and it worked well.
I tried also, to cut out a piece of the two rings, to clip the switch-button over the pin, to avoid disassambling the complete gear-stick-head, but the result was unsatisfying.
The stick-head is easy to unmount and than it's also easy to mount the new switch-button..... round about 120€ saved :-)
On the last foto the switch is shown in PETG red trans... looks also interesting :-)
injoy it.....
Compatible vehicles
- 2010-2016 Renault Megane (GT)
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Automatic Gear Release Knob |
|---|---|
| Make | Renault |
| Model | Megane |
| Year | 2010 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 1 (STL) |
| Part number | CAT-5f4c5fc6 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Renault parts
Browse all Renault replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-4.0.