Bed Rail Tie Down – 2017 Toyota Tacoma
Bed Rail Tie Down – 2017 Toyota Tacoma
Need a replacement bed rail tie down for your 2017 Toyota Tacoma? This 3D model lets you print a replacement for a broken, worn or missing original piece.
About this part
This is a tie-down insert for a 2017 Toyota Tacoma bed rail. It uses a 1/4 inch threaded eye-hook and a 1 1/2 inch washer. the thing includes a sleeve for the washer so it does not scratch the rail. Thing dimensions are in mm.
To install it, screw one nut all the way onto the eye hook, install the washer, install the washer sleelve. put the other nut into the nut-shaped recess in the block and barely screw in the eye-hook until it just catches the nut in the block. Remove the end-plug on the tacoma bed rail and slide the block tinto the rail. place it where you want it on the rail and tighten the eye-hook until the block no longer slides. Replace the end-plug on the rail and you are done. Note that if you want to use an eye-hook that is longer, you can simply adjust the first nut to hold the washer further down the threads. Enjoy!
Compatible vehicles
- 2017 Toyota Tacoma
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Bed Rail Tie Down |
|---|---|
| Make | Toyota |
| Model | Tacoma |
| Year | 2017 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 2 (STL) |
| Part number | CAT-e48053bc |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Toyota parts
Browse all Toyota replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-4.0.