BMW 3 Series E46 Exterior Pack – 28 STL Files
BMW 3 Series E46 Exterior Pack – 28 STL Files
Looking for BMW 3 Series E46 3D printed parts for the outside of the car? This pack holds 28 STL files for headlight washer caps, lamp covers, fog light mesh, trunk handles, hooks and mirror adapters. It costs €29.99, while the same files bought separately add up to €245.72, so you keep 88% of that money.
Outside parts on an E46 live a hard life: UV light, road salt and car washes. Headlight washer covers fall off on the motorway, the trunk handle insert snaps, the tail light bulb holder loses a tab. Most of these are cheap plastic bits that are hard to buy alone. With this pack you can print them as soon as one goes missing.
What you get, by part type
| Part type | Files |
|---|---|
| Lights & lamp parts | 8 |
| Covers & caps | 5 |
| Knobs, handles & levers | 4 |
| Badges & grilles | 2 |
| Switches & blanks | 2 |
| Hooks | 2 |
| Tools | 1 |
| Other parts | 4 |
How it works
- Pay once for the pack.
- Download the ZIP with all STL files straight away. No physical part is sent.
- Print it yourself or at a print shop. For outside parts use ASA, which handles sun and heat better than PETG. PETG is fine for trunk parts.
Questions
Is ASA really needed?
For anything in direct sun, yes, it is the safer choice. PLA will warp and fade within a season.
Do the parts fit facelift and pre-facelift cars?
Many do. Where a file is for one version only (facelift, Touring, sedan, coupe), the title says so. Compare with your original before printing.
Can I paint the printed parts?
Yes. Light sanding and a plastic primer give the best result on visible parts like washer caps.
Who designed the files?
Independent designers, each one credited on the single product page.
Need the cabin too? Get the full BMW 3 Series E46 pack, or look through BMW 3 Series parts and all packs. Missing a part? Send us a photo.
What's inside
- Trunk Bottom Support Pad (convertible/coupe) for BMW Vehicles – BMW E46
- BMW E46 Lightweight Trunk Vent Cover Because Racecar
- Hood / Trunk Logo Dragon03 82mm / 74mm for BMW Vehicles – BMW E46
- Passengers Side Door Handle Blank Plate for BMW Vehicle – BMW E46
- E46 Crankshaft Seal Removal Tool – BMW E46
- Shifter Boot Bracket for BMW Vehicles – BMW E46
- BMW M3 E46 Duplo
- Headlight Washer Nozzle Cover – 2001-2005 Bmw 3 Series E46 (facelift)
- Trunk Floor Pull Handle – 1999-2005 Bmw 3 Series E46 (Touring)
- Tail Light Bulb Holder Broken Tab Fix – 1999 Bmw 3 Series E46
- Mirror Riser Adapter – 1999-2006 Bmw 3 Series E46 (Coupe)
- Window Switch Rocker – 1998-2006 Bmw 3 Series E46
- Window Regulator Bushing – 1998-2006 Bmw 3 Series E46
- Trunk/boot Handle Repair Insert – 1998-2006 Bmw 3 Series E46 (Sedan)
- Trunk Floor Hook – 1998-2005 Bmw 3 Series E46 (Sedan)
- Sharkfin Antenna Cover – 1998-2006 Bmw 3 Series E46
- Led Headlight Bulb Adapter – 1998-2006 Bmw 3 Series E46
- Lamp Cover – 1998-2006 Bmw 3 Series E46
- Kidney Grills Hacky Fix – 1998-2006 Bmw 3 Series E46
- Hood Release Handle – 1998-2006 Bmw 3 Series E46
- Headlight Washer Cap – 1998-2006 Bmw 3 Series E46
- Fog Light Side Mesh Grille – 1998-2006 Bmw 3 Series E46
- Ews Ring Antenna Holder – 1998-2006 Bmw 3 Series E46
- Trunk Grocery Hook – 1997-2006 Bmw 3 Series E46
- Touring, Roof Rail Delete Kit – 1997-2006 Bmw 3 Series E46 (Touring)
- Headlight Washer Plug – 1997-2006 Bmw 3 Series E46
- Headlight Adjuster Screw – 1997-2006 Bmw 3 Series E46
- Alarm Bracket Roof – 1997-2006 Bmw 3 Series E46
Always compare with your original part before printing. Models for safety-critical parts are not included.