BMW 3 Series E90 Pack – 52 STL Files
BMW 3 Series E90 Pack – 52 STL Files
Looking for BMW 3 Series E90 3D printed parts? This bundle gives you every one of our 52 STL files for this car in one ZIP, for €49.99 instead of €486.48 if you bought each file on its own. That is a 90% saving. The download is instant and no physical part is sent.
It is the easy way to have spares ready for the whole car instead of hunting for one part at a time. A few of the files included: Side-skirt bolt, headlight projector bracket, Obd2 port cover and dosenhalter ohne idrive cupholder.
Files by part type
| Part type | Files |
|---|---|
| Covers, caps, panels and trim | 11 |
| Cup, phone and device holders | 10 |
| Audio, gauges and electronics | 6 |
| Clips, fasteners and bushings | 5 |
| Storage, organizers and hooks | 5 |
| Lights and lamp parts | 4 |
| Vents, ducts and intake | 3 |
| Knobs, handles and switches | 3 |
| Brackets, mounts and adapters | 2 |
| Tools and workshop helpers | 2 |
| Other parts | 1 |
| Total | 52 |
Counts are based on the main use of each file, so a few could fit in more than one group.
How it works
- Buy the pack. One payment of €49.99 for all 52 files.
- Download the STL files. The ZIP is ready right after checkout and stays in your account.
- Print. Use your own 3D printer or send the file to a print shop. We recommend PETG for most parts and ASA for anything that sees sun or engine heat.
FAQ
Which material should I print with?
PETG is strong and easy to print, so it suits most interior parts. Use ASA for parts in direct sun, outside the car or near heat. PLA is fine for a test fit but softens in a hot car.
Will these files fit my BMW 3 Series E90?
Each file was designed by an independent designer for this model, and the product page of each part shows its details and designer. Trim levels and years can differ, so compare the model with your original part before you print.
Who made the designs?
Independent designers. Each one is credited on the product page of the part they designed.
I don't own a 3D printer. Can I still use the files?
Yes. Any local print shop or online print service can print an STL file. Send them the file for the part you need and ask for PETG or ASA.
Keep reading
Browse all BMW parts or compare with our other packs. Missing a part? Contact us with a photo.
What's inside
- BMW 12v Hole Cover 2005-2013 – BMW 3 Series
- Lower Radiator Rubber Mount – 2004-2013 Bmw 3 Series / 1 Series E90/E91/E92/E81/E87
- Intake Manifold Cover Bushing – 2011 Bmw 3 Series E90 (328i)
- Aux Bracket – 2009 Bmw 3 Series E90 (328i)
- Wireless Charger Ashtray Replacement – 2008 Bmw 3 Series E9X
- Volume Knob – 2008 Bmw 3 Series E90
- Side-skirt Bolt – 2007-2010 Bmw 3 Series E9X (335i)
- N54 Rear Main Seal Installer (8 Bolt) – 2007-2010 Bmw 3 Series E9X (335i)
- Exhaust Valve Vacuum Hose Plug (golf Tee Fix) – 2007-2010 Bmw 3 Series E9X (335i)
- Exhaust Rattle Fix Clamp – 2007-2010 Bmw 3 Series E9X (335i)
- Coolant Tank Bracket – 2007-2010 Bmw 3 Series E90 (335i)
- Headlight Projector Bracket – 2006-2008 Bmw 3 Series E90/E91 (Pre-LCI)
- Ac Delete Block-off Ports – 2006 Bmw 3 Series E90 (330i)
- Wiper Cap – 2005-2011 Bmw 3 Series E90
- Vent Louver Connector – 2005-2011 Bmw 3 Series E90
- Vent Clip – 2005-2013 Bmw 3 Series E90/E91/E92
- V Strut Cover Windshield – 2005-2012 Bmw 3 Series E90
- Upholstery Button – 2005-2011 Bmw 3 Series E90
- Trunk Oil Bottle And Funnel Holder – 2005-2013 Bmw 3 Series E90
- Trunk Hook – 2005-2011 Bmw 3 Series E90
…and 32 more files.
Always compare with your original part before printing. Models for safety-critical parts are not included.