Center Console Cup Holder – 2005-2013 Bmw 3 Series E90
Center Console Cup Holder – 2005-2013 Bmw 3 Series E90
Replace a broken or missing center console cup holder on your 2005-2013 Bmw 3 Series E90 with this 3D printable part from PartsRemade.
About this part
Note: You will need to do permanent modifications to your console to make this work!!!!!!!!
If you are like me and have had a E90 BMW for any length of time you might have asked yourself why did BMW make the worthless cubby into a cup holder. I know you guys with the idrive will be left out on this one but maybe it will help someone. I spent a lot of time and tried many times to get this as close as I could to a factory fit. This will fit into the factory clips console, but it will require trimming the console to fit a proper cup. I modeled this around the Yeti Tumbler and it think it seem to fit mose things well. With something like this you will need to print in a material that can handle the high temperatures of the cars interior. I printed mine in CarbonX which made for a very attractive finish for the BMW interior. I also used support which was a real pain to remove with the CarbonX.
I have included the cup holder file and the template to help scribe the console for cutting. I used a dremel cut off to remove the under structure around the cutout then a sanding wheel to match the curve on the cup holder. be sure to take your time and check the fit often. You will also need to trim just about 1mm off the three little supports in the bottom of the console so the cut holder will sit down all the way.
Compatible vehicles
- 2005-2013 Bmw 3 Series E90
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Center Console Cup Holder |
|---|---|
| Make | BMW |
| Model | 3 Series |
| Year | 2005 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 2 (STL) |
| Part number | CAT-3dc79f0d |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More BMW parts
Browse all BMW replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.