Center Console Tray – 2021 Tesla Model 3/y
Center Console Tray – 2021 Tesla Model 3/y
3D printable replacement center console tray made for the 2021 Tesla Model 3/y: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.
About this part
This seemed too simple to pay $30 for, from Tesla, so I made this one for myself.
Wanting to avoid tons of support material (and the rough undersides it would cause), I made this in two pieces and attached the bottom with a few #4-40 countersunk screws. Any screw length up to 1/2" will fit, and the holes in the bottom part are countersunk. It could have benefited from one more screw on each side, but a drop or two of superglue on each side instead, worked just as well.
I printed mine solid (5 vertical shells) for strength, but I think that was overkill. 2 or 3 vertical shells would be plenty strong, and print a little faster.
If I were printing another one, I might make it slightly shallower, and possibly a few mm shorter front-to-back, but this one is pretty darn good, IMO.
Note: The center screw hole is slightly off center, so the bottom and top go together only one way. They are oriented correctly in the stl files, and both are upside down, but put the center screw in first, just in case. Worst case, you have to spin the bottom around 180 degrees after that first screw.
ALSO PLEASE NOTE: I'm told that this 2021 design is 5mm too wide for the 2025 Model Y. I don't go out and remeasure the new cars every year.
Compatible vehicles
- 2021 Tesla Model 3/y
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Center Console Tray |
|---|---|
| Make | Tesla |
| Model | Model 3 |
| Year | 2021 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 2 (STL) |
| Part number | CAT-26b30cce |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Tesla parts
Browse all Tesla replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-4.0.