Cup Holder Adapter – 1989-1995 Toyota 4runner N120
Cup Holder Adapter – 1989-1995 Toyota 4runner N120
3D printable cup holder adapter for the 1989-1995 Toyota 4runner N120: download the STL file and print an affordable replacement for a discontinued or expensive original part.
About this part
This is an ADAPTER. it requires the lower portion of a t100 cupholder ($15 complete assembly on Amazon). beats the $90 hilux drop in replacement. Image shows which part is needed.
Simply order a t100 cupholder, print this part, remove the lower bracket from the t100 cupholder and install it onto the printed part. then it should slide right into the 2nd gen dash slot. it works great for me 2 years later.
Definitely room for improvement, especially aesthetically, adding some curves and getting the dimension perfect. I will not be doing all of that modelling but I welcome anyone else to try.
Print ABS/ASA/PC %100 infill.
SUPPORTS REQUIRED, paint on supports on the small clips over the rear edge as shown in picture. should be as easy to remove as possible.
Compatible vehicles
- 1989-1995 Toyota 4runner N120
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Cup Holder Adapter |
|---|---|
| Make | Toyota |
| Model | 4Runner |
| Year | 1989 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 1 (STL) |
| Part number | CAT-55478110 |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Toyota parts
Browse all Toyota replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.