Door Pull – 1990-1997 Mazda Miata NA

3D printable replacement door pull made for the 1990-1997 Mazda Miata NA: download the STL file and print a replacement for a cracked, lost or hard-to-find original part.

About this part

Mazda Miata Soor Pull (NA)



Porsche-style door pulls for your NA Miata This is a snap-style cap and base that does not require any hardware to hold the cap.



Additional Resources needed:

Adding your color webbing strip for color personalization, the shortest length suggested is 14" as you want enough material to create a loop of 6" and an additional 2" for 1" overlaps for the eye loop to create a little webbing sandwich. Use a 7/8" washer to help keep everything tight.

Use a hot knife or similar tool to create the holes needed in webbing. This will seal the webbing and prevent fraying.



2 ea 7/8" flat washers

36" of color webbing can be bought at most local craft stores



Print settings:

Use PETG or ABS or ASA or stronger material with better heat resistance.

Layer Height: 0.20mm base with variable layer height

Perimeters: 3

Infill: 15% Gyroid

Support: Required

Compatible vehicles

• 1990-1997 Mazda Miata NA

Always compare with your original part before printing. Fitment can vary by trim level and production date.

Specifications

Print settings

Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed

What you get

A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.

More Mazda parts

Browse all Mazda replacement parts or search the full 3D printable car parts library.

Design credit: original design on Thingiverse, licensed CC BY-SA-4.0.