Ford Fiesta Mk6 Pack – 35 STL Files
Ford Fiesta Mk6 Pack – 35 STL Files
Here you get Ford Fiesta Mk6 3D printed parts as digital files: 35 STL models in one pack for €39.99. The single files add up to €295.65, so the pack saves you 86%. Download the ZIP straight after payment, then print at home or hand the files to a local print shop.
The files cover the small parts that tend to break, go missing or are hard to find for this car. Examples from the pack: cigar lighter cover, Ford Fiesta 2008/2017 dashboard snorkel SX V1, window winder and glove compartment bracket. Most of it is interior trim and the little plastic bits a dealer often no longer stocks.
What the pack covers
| Part type | Files |
|---|---|
| Covers, caps, panels and trim | 9 |
| Clips, fasteners and bushings | 5 |
| Vents, ducts and intake | 4 |
| Knobs, handles and switches | 3 |
| Storage, organizers and hooks | 3 |
| Audio, gauges and electronics | 2 |
| Cup, phone and device holders | 2 |
| Lights and lamp parts | 1 |
| Brackets, mounts and adapters | 1 |
| Other parts | 5 |
| Total | 35 |
How it works
- Buy the pack. One payment of €39.99 for all 35 files.
- Download the STL files. The ZIP is ready right after checkout and stays in your account.
- Print. Use your own 3D printer or send the file to a print shop. We recommend PETG for most parts and ASA for anything that sees sun or engine heat.
Ford Fiesta Mk6 pack: common questions
Can I buy just one file instead?
Yes. Single files cost €5.99, €9.99 or €14.99 depending on size. If you need more than a handful, the pack at €39.99 is usually cheaper.
Which material should I print with?
PETG is strong and easy to print, so it suits most interior parts. Use ASA for parts in direct sun, outside the car or near heat. PLA is fine for a test fit but softens in a hot car.
Who made the designs?
Independent designers. Each one is credited on the product page of the part they designed.
Will these files fit my Ford Fiesta Mk6?
Each file was designed by an independent designer for this model, and the product page of each part shows its details and designer. Trim levels and years can differ, so compare the model with your original part before you print.
Keep reading
Browse all Ford parts or compare with our other packs. Missing a part? Contact us with a photo.
What's inside
- Front Ford Fiesta 2006 Towing Cover - Coperchio Traino Anteriore Per Ford Fiesta 2006
- Ford Fiesta Switch Button 2005
- Ford Fiesta 2008/2017 Dashboard Snorkel SX V1
- Ford Fiesta MK6 Windshield Fluid Reservoir Cap
- Ford Fiesta mk5 mk6 Read Lights Handscrew Adapter
- Ford Fiesta Button (2002~2011)
- Glove Compartment Bracket – 2002-2012 Ford Fiesta / Fusion Mk5
- Air Vent Gauge Pod – 2012-2015 Ford Fiesta MK6
- Windshield Washer Reservoir Cap – 2008 Ford Fiesta
- Windshield Fluid Cap – 2008-2017 Ford Fiesta MK6
- Torpedo Side Vent – 2008-2017 Ford Fiesta MK6
- Cup Holder – 2008 Ford Fiesta
- Climate Control Actuator Arm – 2008-2017 Ford Fiesta VI
- Antenna – 2008-2017 Ford Fiesta MK6
- Air Vent Blades – 2008-2017 Ford Fiesta MK6
- Wheel Centre Cap – 2007 Ford Fiesta (XR4 ST150)
- Hvac Recirculation Actuator Lever Arm – 2007-2008 Ford Fiesta MK6 (XR4)
- Glove Compartment Hinge – 2006 Ford Fiesta MK5
- Parts – 2005-2008 Ford Fiesta ST150 (ST150)
- Glass Pillar Clip Retainer – 2005 Ford Fiesta (Power)
…and 15 more files.
Always compare with your original part before printing. Models for safety-critical parts are not included.